PAINTER

EXPERIENCE AND QUALIFICATIONS

Minimum Experience & Essential Knowledge

• 3 5 Years of experience
• Good Communication skills in Arabic or other common language among the employees.

Minimum Entry Qualifications

• Industrial Training

ROLE ACCOUNTABILITIES

• Remove grease, dirt, paint, and rust from equipment surfaces in preparation for paint application, using abrasives, solvents, brushes, washing tanks, or sandblasters.
• Pour paint into spray guns and adjust nozzles and paint mixes in order to get the proper paint flow and coating thickness.
• Monitor painting operations in order to identify flaws such as blisters and streaks so that their causes can be corrected.
• Sand equipment surfaces between coats of paint and/or primer in order to remove flaws and enhance adhesion for subsequent coats.
• Disassemble, clean, and reassemble sprayers and power equipment, using solvents, wire brushes, and cloths for cleaning duties.
• Mask surfaces with tape or paper in order to protect them from paint if required.
• Spray prepared surfaces with specified amounts of primers and finish coatings. Always measure with WFT gauge in order to make sure we are painting right paint thickness.
• Allow the sprayed product to dry and then touch up any spots that may have been missed.
• Paint by hand areas that cannot be reached with a spray gun.
• Dispose of hazardous waste in an appropriate manner.
• Perform duties with safe manner.

DUTIES AND RESPONSIBILITIES

• Spraying the steel products that are produced in the plant with primer and finish paint as instructed.